RANCANG BANGUN SISTEM PENDETEKSI TITIK API BERBASIS IOT

DHAFIN RIZQY ZAPUTRA, . (2025) RANCANG BANGUN SISTEM PENDETEKSI TITIK API BERBASIS IOT. Sarjana thesis, UNIVERSITAS NEGERI JAKARTA.

	Text COVER.pdf Download (554kB)
	Text BAB 1.pdf Download (213kB)
	Text BAB 2.pdf Restricted to Registered users only Download (825kB) | Request a copy
	Text BAB 3.pdf Restricted to Registered users only Download (1MB) | Request a copy
	Text BAB 4.pdf Restricted to Registered users only Download (1MB) | Request a copy
	Text BAB 5.pdf Restricted to Registered users only Download (187kB) | Request a copy
	Text Daftar Pustaka.pdf Download (242kB)
	Text Lampiran.pdf Restricted to Registered users only Download (1MB) | Request a copy

Abstract

Penelitian ini bertujuan untuk menghasilkan Alat Sistem Pendeteksi Titik Panas Berbasis IOT (Internet Off Things). Pemantauan dilakukan pada web thinger.Io dan aplikasi telegram. pendeteksi titik api menggunakan sensor Flame, pendeteksi titik gas menggunakan sensor MQ-6, untuk monitoring tegangan, arus, dan daya menggunakan sensor PZEM004T, pendeteksi titik api,gas dan monitoring menggunakan mikrokontroler ESP32.Penelitian ini menggunakan metode rekayasa Teknik (Forward Engeneering). Dimulai dari perancangan, pembuatan, dan pengujian. Adapun tahapan proses pelaksanaan yaitu: tahap perencanaan meliputi studi literatur mengenai penggunaan alat dan bahan material untuk alat display yang akan dibuat; manfaat dan kelebihan alat display yang akan dibuat, tahap perancangan meliputi penuangan ide gagasan dan spesifikasi rancang bangun sistem pendeteksi ttitik panas. Hasil dari penelitian ini menunjukan Alat Sistem Pendeteksi Titik Panas Berbasis IOT (Internet Off Things) bahwa PZEM-004T dapat mengukur tegangan, arus dan daya, sensor Flame dapat mendeteksi api (yang dihasilkan dari korek api), dan sensor MQ-6 dapat mendeteksi gas (yang dihasilkan dari korek gas). Ketika bahaya kebakaran terdeteksi maka buzzer akan aktif sebagai alarm dan hasil pembacaan modul sensor akan dikirimkan notifikasi via Whatsapp dan untuk mendeteksi arus, tegangan dan daya akan dapat di monitoring pada website. Halaman Website dapat dipantau dari jarak jauh, jika terkoneksi dengan internet. Hasil pengujian rata-rata nilai error pada sensor PZEM004T menunjukkan bahwa pada beban puncak (pukul 19.00), kesalahan tegangan sebesar 0,67%, arus sebesar 5,02%, dan daya sebesar 5,6%. Sementara itu, pada pengujian di pagi hari (pukul 10.00), kesalahan tegangan tercatat sebesar 5,1%, arus sebesar 10,25%, dan daya sebesar 7,45%. Kesimpulan dari penelitian Alat Sistem Pendeteksi Titik Panas Berbasis IOT (Internet Off Things) adalah sistem telah berhasil dirancang sesuai dengan tujuan penelitian yang diharapkan oleh peneliti, yaitu menghasilkan Rancang Bangun Sistem Pendeteksi Titik Panas (Api, Gas, Tegangan, Daya, dan Arus) Berbasis IOT (Internet Off Things).***** This This research aims to produce an IOT-Based Hot Spot Detection System Tool (Internet Off Things). Monitoring is carried out on the web thinger. Io and the telegram application. the fire point detector uses the Flame sensor, the gas point detector uses the MQ-6 sensor, for voltage, current, and power monitoring using the PZEM004T sensor, the fire point detector, the gas and monitoring uses the ESP32 microcontroller. This study uses the Forward Engineering method. Starting from design, manufacturing, and testing. The stages of the implementation process are: the planning stage includes a literature study on the use of tools and materials for the display equipment to be made; The benefits and advantages of the display equipment to be made, the design stage includes pouring out ideas and design specifications for the hot spot detection system. The results of this study show that the PZEM-004T can measure voltage, current and power, the Flame sensor can detect fire (generated from matches), and the MQ-6 sensor can detect gases (generated from matches). When a fire hazard is detected, the buzzer will be activated as an alarm and the results of the sensor module reading will be sent a notification via Whatsapp and to detect current, voltage and power will be monitored on the website. Website pages can be monitored remotely, if connected to the internet. The average test results of the error value on the PZEM004T sensor showed that at peak load (at 19.00), the voltage error was 0.67%, the current was 5.02%, and the power was 5.6%. Meanwhile, in the morning test (10.00 am), the voltage error was recorded at 5.1%, the current was 10.25%, and the power was 7.45%. The conclusion of the research of the IOT-Based Hot Spot Detection System Tool (Internet Off Things) is that the system has been successfully designed in accordance with the research objectives expected by the researcher, which is to produce the Design and Construction of an IOT-Based (Internet-Off-Things) Hot Spot Detection System (Fire, Gas, Voltage, Power, and Current).

Item Type:	Thesis (Sarjana)
Additional Information:	1). Drs.Readysal Monantun. M.Pd. ; 2). Massus Subekti, S.Pd., M.T.
Subjects:	Teknologi dan Ilmu Terapan > Teknologi (umum) > Teknologi Pendidikan Teknologi dan Ilmu Terapan > Teknik Elektronika
Divisions:	FT > S1 Pendidikan Teknik Elektro
Depositing User:	Dhafin Rizqy Zaputra .
Date Deposited:	21 Feb 2025 06:07
Last Modified:	21 Feb 2025 06:07
URI:	http://repository.unj.ac.id/id/eprint/53235

Actions (login required)

View Item